- New
New products
8AL58 non-rechargeable gas cans
"Non-rechargeable" aluminum can containing a gas sample at a known concentration for functional tests and gas detector calibration. Available in 34 liters at 34 bars (capacity 1 liter) or 58 liters at 34 bar (capacity 1.7 liters). Regulator connection 5/8 "U16 (C10).
References Manufacturer: 8AL58-01-2,2,8AL58 / 04-0.85,8AL58 / 20-XXX, 8AL58 / 27-2.8AL58R / 40-XXX, 8AL58 / 61-18,8AL58 / 61-15, 8A1 / 69-XXX, 8AL58 / 79-5K, 8AL58 / 79-10K, 8AL58 / MIX1,45,8AL58 / MIX2,2
OGG0007
Data sheet
- Warranty
- 3¨
- Application / usage
- ATEX zone
- New
2Al34 non-rechargeable gas cans
"Non-rechargeable" aluminum can containing a gas sample at a known concentration for functional tests and gas detector calibration. Available in 34 liters at 34 bars (capacity 1 liter) or 58 liters at 34 bar (capacity 1.7 liters). Regulator connection 5/8 "U16 (C10).
References Manufacturer: 2Al34-01-2,2,2AL34 / 04-0.85,2AL34 / 20-XXX, 2AL34 / 27-2.2AL34R / 40-XXX, 2Al34 / 61-18,2AL34 / 61-15,2AL34 / N2.2AL34R / 69-XXX, 2Al34 / 79-5K, 2Al34 / MIX1,45,2AL34 / MIX2,2
OGG0006
Data sheet
- Warranty
- 3¨
- Application / usage
- ATEX zone
- New
GDA-TK test and calibration kits
Test and calibration kit: The kit consists of a polypropylene tool bag comprising: two gaseous mixing cans (34 liters at 34 bar) containing calibration gas at a specific concentration, a control valve for Canopy with pressure indicator, a gas detector calibration adapter, a 30 cm polyurethane pipe and a calibration magnet.
References Manufacturer: GDA-TK-01, GDA-TK-04, GDA-TK-20-XXX, GDA-TK-27, GDA-TK-40-XXX, GDA-TK-61-18, GDA-TK- 61-15, GDA-TK-N2, GDA-TK-69-XXX, GDA-TK-79-5K, GDA-TK-79-10K, GDA-TK-MIX-1,45, GDA-TK-MIX- 2,2, GDA-TK
OGG0005
Data sheet
- Warranty
- 3¨
- Application / usage
- ATEX zone
- New
Dust / DY gas detectors
- IP65
- Based on a microprocessor
- exit from 4 to 20 mA
- Three outputs of relay contacts without tension
- RS-485 Series Interface Modbus RTU or protocol for remote control and maintenance operations.
- 8x2 characters LCD screen
- Calibration procedure 'a person' non-intrusive
- Fully programmable
- Reduced size
- Low energy consumption
- Based on a microprocessor
- exit from 4 to 20 mA
- Three outputs of relay contacts without tension
- RS-485 Series Interface Modbus RTU or protocol for remote control and maintenance operations.
- 8x2 characters LCD screen
- Calibration procedure 'a person' non-intrusive
- Fully programmable
- Reduced size
- Low energy consumption
Certified ATEX gas detector II 3G EX Na II T6 (ATEX ZONE 2), aluminum or stainless steel alloy case, IP65 protection index. With display. Available outputs: 4-20mA or relay, RS485.
References Manufacturer: DUST / DY / 1XX / AAS, DUST / DY / 1XX / CAS, DUST / DY / 1XXS / AAS, DUST / DY / 1XXS / CAS, DUST / DY / 2XX / AAS, DUST / DY / 2XX / CAS, DUST / DY / 2XXD ,,, / AAS, DUST / DY / 2XXD ,,, / CAS, DUST / DY / 279 / AAS, DUST / DY / 279-2 / AAS, Dust / DY / 279 / Case, Dust / DY / 279-2 / Case, Dust / DY / 279D ,,, / AAS, DUST / DY / 279D ,,, / CAS, DUST / DY / 361 / AAS, Dust / DY / 361 / CAS, DUST / DY / 361 + / CAS, DUST / DY / 320 / AAS, DUST / DY / 320-1 / AAS, DUST / DY / 320-2 / AAS, DUST / DY / 369 / AAS, Dust / DY / 369-1 / AAS, Dust / DY / 369-2 / AAS, Dust / DY / 369-3 / AAS, Dust / DY / 340 / AAS, DUST / DY / 340-1 / AAS, DUST / DY / 340-2 / AAS, DUST / DY / 340-3 / AAS, DUST / DY / 340-4 / AAS, DUST / DY / 327-1 / AAS, DUST / DY / 370 / AAS, DUST / DY / 370-1 / AAS, DUST / DY / 364 / AAS, DUST / DY / 366 / AAS, DUST / DY / DY / 339 / AAS, DUST / DY / 39Y / AAS, DUST / DY / 382 / AAS, DUST / DY / 384 / AAS, DUST / DY / 320 / CAS, Dust / DY / 320-1 / Case, Dust / DY / 320-2 / Case, Dust / DY / 369 / Case, Dust / DY / 369-1 / Case, Dust / DY / 369-2 / Case, Dust / DY / 369-3 / Case, Dust / DY / 340 / Case, Dust / DY / 340-1 / Case, Dust / DY / 340-2 / Case, Dust / DY / 340-3 / Case, Dust / DY / 340-4 / Case, Dust / DY / 327 / case, dust / dy / 327-1 / case, dust / dy / 370 / case, dust / dy / 370-1 / case, dust / dy / 363 / case, dust / dy / 364 / case, dust / dy / 365 / case, Dust / DY / 366 / Case, Dust / DY / 339 / Case, Dust / DY / 39Y / Case, Dust / DY / 382 / Case, Dust / DY / 383 / Case, Dust / DY / 384 / Case, Dust / DY / 571 / AAS, Dust / DY / 571-1 / AAS, Dust / DY / 571-2 / AAS, Dust / DY / 571 / Case, Dust / DY / 571-1 / Case, Dust / DY / 571-2 / Case, RAS-DY-EX2AL-101
OGG0004
Data sheet
- Ambiant temperature
- -40 ° C to + 85 ° C
- Temperature class
- T6
- Warranty
- 3¨
- Waterproofing protection (IP)
- Ip65
- Application / usage
- ATEX zone
- Certificates
- Atex.iecex
- New
Dust / AD gas detectors
- IP65
- Based on microprocessor
- Exit 4-20 mA
- Three outputs of relay contacts without tension
- RS-485 Series Interface Modbus RTU or protocol for remote control and maintenance operations
- LCD display of 8x2 characters
- Calibration procedure "A person" non-intrusive
- Fully programmable
- Small size
- Reduced power consumption
- Based on microprocessor
- Exit 4-20 mA
- Three outputs of relay contacts without tension
- RS-485 Series Interface Modbus RTU or protocol for remote control and maintenance operations
- LCD display of 8x2 characters
- Calibration procedure "A person" non-intrusive
- Fully programmable
- Small size
- Reduced power consumption
Certified ATEX gas detector II 3G EX Na II T6 (ATEX ZONE 2), aluminum or stainless steel alloy case, IP65 protection index. Available outputs: 4-20mA or relay, RS485.
References Manufacturer: Dust / AD / 1XX / AAS, Dust / AD / 1XX / CCS, Dust / AD / 1XX / AAS-ID, Dust / AD / 1XX / CCS-ID, Dust / AD / 1XXS / AAS, Dust / AD / 1XXS / CCS, Dust / AD / 1XXS / AAS-ID, Dust / AD / 1XXS / CCS-ID, Dust / AD / 141S / AAS, Dust / AD / 141S-1 / AAS, Dust / AD / 141S / AAS-ID, Dust / AD / 141S-1 / AAS-ID, Dust / AD / 141S / CCS, Dust / AD / 141S-1 / CCS, Dust / AD / 141S / CCS-ID, Dust / AD / 141S-1 / CCS-ID, Dust / AD / 2XX / AAS, Dust / AD / 2XX / AAS-ID, Dust / AD / 2XX / CCS, Dust / AD / 2XX / CCS-ID, Dust / AD / 2XXD ,,, / AAS, Dust / AD / 2XXD ,,, / AAS-ID, Dust / AD / 2XXD ,,, / CCS, Dust / AD / 2XXD ,,, / CCS-ID, Dust / AD / 279 / AAS, Dust / AD / 279 / AAS-ID, Dust / AD / 279-2 / AAS, Dust / AD / 279-2 / AAS-ID, Dust / AD / 279 / CCS, Dust / AD / 279 / CCS-ID, Dust / AD / 279-2 / CCS, Dust / AD / 279-2 / CCS-ID, Dust / AD / 279D ,,, / AAS, Dust / AD / 279D ,,, / AAS-ID, Dust / AD / 279D ,,, / CCS, Dust / AD / 279D ,,, / CCS-ID, Dust / AD / 361 / AAS, Dust / AD / 361 / AAS-ID, Dust / AD / 361 / CCS, Dust / AD / 361 / CCS-ID, Dust / AD / 361 + / CCS, Dust / AD / 361 + / CCS-ID, Dust / AD / 320 / AAS, Dust / AD / 320 / AAS-ID, Dust / AD / 320-1 / AAS, Dust / AD / 320-1 / AAS-ID, Dust / AD / 320-2 / AAS, Dust / AD / 320-2 / AAS-ID, Dust / AD / 369 / AAS, Dust / AD / 369 / AAS-ID, Dust / AD / 369-1 / AAS, Dust / AD / 369-1 / AAS-ID, Dust / AD / 369-2 / AAS, Dust / AD / 369-2 / AAS-ID, Dust / AD / 369-3 / AAS, Dust / AD / 369-3 / AAS-ID, Dust / AD / 340 / AAS, Dust / AD / 340 / AAS-ID, Dust / AD / 340-1 / AAS, Dust / AD / 340-1 / AAS-ID, Dust / AD / 340-2 / AAS, Dust / AD / 340-2 / AAS-ID, Dust / AD / 340-3 / AAS, Dust / AD / 340-3 / AAS-ID, Dust / AD / 340-4 / AAS, Dust / AD / 340-4 / AAS-ID, Dust / AD / 327 / AAS, Dust / AD / 327 / AAS-ID, Dust / AD / 327-1 / AAS, Dust / AD / 327-1 / AAS-ID, Dust / AD / 370 / AAS, Dust / AD / 370 / AAS-ID, Dust / AD / 370-1 / AAS, Dust / AD / 370-1 / AAS-ID, Dust / AD / 363 / AAS, Dust / AD / 363 / AAS-ID, Dust / AD / 364 / AAS, Dust / AD / 364 / AAS-ID, Dust / AD / 365 / AAS-ID, Dust / AD / 366 / AAS, Dust / AD / 366 / AAS-ID, Dust / AD / 339 / AAS, Dust / AD / 339 / AAS-ID, Dust / AD / 39Y / AAS, Dust / AD / 39Y / AAS-ID, Dust / AD / 382 / AAS, Dust / AD / 382 / AAS-ID, Dust / AD / 383 / AAS, Dust / AD / 383 / AAS-ID, Dust / AD / 384 / AAS, Dust / AD / 384 / AAS-ID, Dust / AD / 320 / CCS, Dust / AD / 320 / CCS-ID, Dust / AD / 320-1 / CCS, Dust / AD / 320-1 / CCS-ID, Dust / AD / 320-2 / CCS, Dust / AD / 320-2 / CCS-ID, Dust / AD / 369 / ccs, dust / ad / 369 / ccs-id, dust / ad / 369-1 / ccs, dust / ad / 369-1 / ccs-id, dust / ad / 369-2 / ccs, dust / ad / 369-2 / CCS-ID, Dust / AD / 369-3 / CCS, Dust / AD / 369-3 / CCS-ID, Dust / AD / 340 / CCS, Dust / AD / 340 / CCS-ID, Dust / AD / 340-1 / CCS, Dust / AD / 340-1 / CCS-ID, Dust / AD / 340-2 / CCS, Dust / AD / 340-2 / CCS-ID, Dust / AD / 340-3 / CCS, Dust / AD / 340-3 / CCS-ID, Dust / AD / 340-4 / CCS, Dust / AD / 340-4 / CCS-ID, Dust / AD / 327 / CCS, Dust / AD / 327 / CCS-ID, Dust / AD / 327-1 / CCS, Dust / AD / 327-1 / CCS-ID, Dust / AD / 370 / CCS, Dust / AD / 370 / CCS-ID, Dust / AD / 370-1 / CCS, Dust / AD / 370-1 / CCS-ID, Dust / AD / 363 / CCS, Dust / AD / 363 / CCS-ID, Dust / AD / 364 / CCS, Dust / AD / 364 / CCS-ID, Dust / AD / 365 / CCS, Dust / AD / 365 / CCS-ID, Dust / AD / 366 / CCS, Dust / AD / 366 / CCS-ID, Dust / AD / 339 / CCS, Dust / AD / 339 / CCS-ID, Dust / AD / 39Y / CCS, Dust / AD / 39Y / CCS-ID, Dust / AD / 382 / CCS, Dust / AD / 382 / CCS-ID, Dust / AD / 383 / CCS, Dust / AD / 383 / CCS-ID, Dust / AD / 384 / CCS, Dust / AD / 384 / CCS-ID, Dust / AD / 571 / AAS, Dust / AD / 571 / AAS-ID, Dust / AD / 571-1 / AAS, Dust / AD / 571-1 / AAS-ID, Dust / AD / 571-2 / AAS, Dust / AD / 571-2 / AAS-ID, Dust / AD / 571 / CCS, Dust / AD / 571 / CCS-ID, Dust / AD / 571-1 / CCS, Dust / AD / 571-1 / CCS-ID, Dust / AD / 571-2 / CCS, Dust / AD / 571-2 / CCS-ID
OGG0003
Data sheet
- Ambiant temperature
- -40 ° C to + 85 ° C
- Temperature class
- T6
- Warranty
- 3¨
- Waterproofing protection (IP)
- Ip65
- Application / usage
- ATEX zone
- Certificates
- Atex.iecex
- New
RAS / DY gas detectors
- IP66
- Based on a microprocessor
- Three outputs of relay contacts without tension
- RS-485 Modbus RTU Series Interface or Protocol for Remote Control and Maintenance
- LCD display of 8x2 characters
- Calibration procedure "A person" non-intrusive
- Fully programmable
- small and low energy consumption
- ATEX II CERTIFICATE 2G EX D IIC T6
- Based on a microprocessor
- Three outputs of relay contacts without tension
- RS-485 Modbus RTU Series Interface or Protocol for Remote Control and Maintenance
- LCD display of 8x2 characters
- Calibration procedure "A person" non-intrusive
- Fully programmable
- small and low energy consumption
- ATEX II CERTIFICATE 2G EX D IIC T6
Certified ATEX gas detector II 2 g EX d ic T6, aluminum or stainless steel alloy case, IP65 protection index. With display. Available outputs: 4-20mA or relay, RS485.
References Manufacturer: RAS / DY / 1XX / AAS, RAS / DY / 1XX / CAS, RAS / DY / DY / 1XXS / CAS, RAS / DY / 141S / AAS, RAS / DY / DY / 141S-1 / AAS, RAS / DY / 141S / CAS, RAS / DY / 141S-1 / CAS, RAS / DY / 2XX / AAS, RAS / DY / 2XX / CAS, RAS / DY / 2XXD ,,, / AAS, RAS / DY / 2XXD ,,,, / CAS, RAS / DY / 279 / AAS, RAS / DY / 279-2 / AAS, RAS / DY / 279 / CAS, RAS / DY / 279-2 / CAS, RAS / DY / 279D ,,, / AAS, RAS / DY / 279D ,,, / CAS, RAS / DY / 361 / AAS, RAS / DY / 361 / CAS, RAS / DY / 361 + / CAS, RAS / DY / 320 / ASA, RAS / DY / 320-1 / AAS, RAS / DY / 320-2 / AAS, RAS / DY / 369 / AAS, RAS / DY / 369-1 / AAS, RAS / DY / 369-2 / AAS, RAS / DY / 369-3 / AAS, RAS / DY / 340 / AAS, RAS / DY / 340-1 / AAS, RAS / DY / 340-2 / AAS, RAS / DY / 340-4 / AAS, RAS / DY / 327 / AAS, RAS / DY / 327-1 / AAS, RAS / DY / 370 / AAS, RAS / DY / 366 / AAS, RAS / DY / 339 / AAS, RAS / DY / 320 / Case, RAS / DY / DY / 320-1 / Case, RAS / DY / 320-2 / Case, RAS / DY / 369 / Case, RAS / DY / 369-1 / Case, RAS / DY / 369-2 / Case, RAS / DY / 369-3 / Case, RAS / DY / 340 / Case, RAS / DY / 340-1 / Case, RAS / DY / 340-2 / Case, RAS / DY / 340-4 / Case, RAS / DY / 327 / Case, RAS / DY / 327-1 / Case, RAS / DY / 370 / Case, RAS / DY / 370-1 / Case, RAS / DY / 339 / Case, RAS / DY / 571 / AAS, RAS / DY / 571-1 / AAS, RAS / DY / 571-2 / AAS, RAS / DY / 571 / Case, RAS / DY / 571-1 / Case, RAS / DY / 571-2 / Case
OGG0002
Data sheet
- Ambiant temperature
- -40 ° C to + 85 ° C
- Temperature class
- T6
- Warranty
- 3¨
- Waterproofing protection (IP)
- Ip66
- Application / usage
- ATEX zone
- Gas class
- IIC
- ATEX protection mode
- Ex of
- Certificates
- Atex.iecex
- New
RAS / AD gas detectors
- IP65
- Based on a microprocessor
- Output from 4 to 20 mA and / or
- Three outputs of relay contacts without tension
- RS-485 Modbus RTU Series Interface or Protocol for Remote Control and Maintenance
- LCD display of 8x2 characters
- Calibration procedure "A person" non-intrusive
- Fully programmable
- small and low energy consumption
- ATEX II CERTIFICATE 2G EX D IIC T6
- Based on a microprocessor
- Output from 4 to 20 mA and / or
- Three outputs of relay contacts without tension
- RS-485 Modbus RTU Series Interface or Protocol for Remote Control and Maintenance
- LCD display of 8x2 characters
- Calibration procedure "A person" non-intrusive
- Fully programmable
- small and low energy consumption
- ATEX II CERTIFICATE 2G EX D IIC T6
Certified ATEX gas detector II 2 g EX d ic T6, aluminum or stainless steel alloy case, IP65 protection index. Available outputs: 4-20mA or relay, RS485.
References Manufacturer: RAS / AD / 1XX / AAS, RAS / AD / 1XX / CCS, RAS / AD / 1XXS / AAS, RAS / AD / 1XXS / CCS, RAS / AD / 141S / ASA, RAS / AD / 141S-1 / AAS, RAS / AD / 141S / CCS, RAS / AD / 141S-1 / CCS, RAS / AD / 2XX / ASA, RAS / AD / 2XX / CCS, RAS / AD / 2XXD ,,, / AAS, RAS / AD / 2XXD ,,, / CCS, RAS / AD / 279 / AAS, RAS / AD / 279-2 / ASA, RAS / AD / 279 / CCS, RAS / AD / 279-2 / CCS, RAS / AD / 279D ,,, / AAS, RAS / AD / 279D ,,,, / CCS, RAS / AD / 361 / AAS, RAS / AD / 361 / CCS, RAS / AD / 361 + / CCS, RAS / AD / 320 / AAS, RAS / AD / 320-1 / AAS, RAS / AD / 320-2 / AAS, RAS / AD / 369 / AAS, RAS / AD / 369-1 / AAS, RAS / AD / 369-2 / AAS, RAS / AD / 369-3 / ASA, RAS / AD / 340 / AAS, RAS / AD / 340-1 / AAS, RAS / AD / 340-2 / AAS, RAS / AD / 340-4 / AAS, RAS / AD / 327 / AAS, RAS / AD / 327-1 / AAS, RAS / AD / 370 / AAS, RAS / AD / 370-1 / AAS, RAS / AD / 369 / AAS, RAS / AD / 320 / CCS, RAS / AD / 320-1 / CCS, RAS / AD / 320-2 / CCS, RAS / AD / 369 / CCS, RAS / AD / 369-1 / CCS, RAS / AD / 369-2 / CCS, RAS / AD / 369-3 / CCS, RAS / AD / 340 / CCS, RAS / AD / 340-1 / CCS, RAS / AD / 340-2 / CCS, RAS / AD / 340-3 / CCS, RAS / AD / 340-4 / CCS, RAS / AD / 327 / CCS, RAS / AD / 327-1 / CCS, RAS / AD / 370 / CCS, RAS / AD / 370-1 / CCS, RAS / AD / 369 / CCS, RAS / AD / 571 / ASA, RAS / AD / 571-1 / AAS, RAS / AD / 571-2 / AAS, RAS / AD / 571 / CCS, RAS / AD / 571-1 / CCS, RAS / AD / 571-2 / CCS
OGG0001
Data sheet
- Ambiant temperature
- -20 ° C to 40 ° C
- Temperature class
- T6
- Warranty
- 3¨
- Feed
- 24V DC
- Waterproofing protection (IP)
- Ip65
- Application / usage
- ATEX zone
- ATEX zone
- Zone 1/21
- Gas class
- IIC
- ATEX protection mode
- Ex d (explosion)
- Certificates
- Atex.iecex
- Material
- Aluminum
- Body colors
- Gray metallic
- Type of detection
- Gas
- -40 ° C to + 85 ° C
- 1
- New
Flashing light with intrinsic safety LED series FD40IS
- 8 flashing or state LEDs
- High light intensity
- Long LED LED design
- Available in six different colors
- Up to 4 modules in any color combination
- Flated ABS Case
- High light intensity
- Long LED LED design
- Available in six different colors
- Up to 4 modules in any color combination
- Flated ABS Case
FD40IS Intrinsically Safety LED Flashing Visual Signal Visual Signal designed for use in hazardous environments. The FD40IS product series is a flashing signal. This unit should be used with a Zener barrier or approved galvanic insulator. This range of products should only be powered by a Zener barrier or a properly dimensioned galvanic insulator. The power supply of these devices without the appropriate barrier can damage these products and cancel any protection index.
References Manufacturer: 212407,209638,207067
MOF0118
Data sheet
- Feed
- 12V DC
- Waterproofing protection (IP)
- Ip65
- Application / usage
- ATEX zone
- ATEX zone
- Zone 1/2
- Certificates
- THIS
- Material
- PC / ABS
- Body colors
- Red
- LED indicator
- 1¨
- New
AS200M Industrial Mermaid
- Rated continuously
- Suitable for wall mounting or on post
- Omnidirectional cover at 360
- Very high sound power
- Dust and weather sealing (when the impeller is mounted under the black ABS housing)
- molded aluminum body
Rotor, stator and lid in ABS
- Suitable for wall mounting or on post
- Omnidirectional cover at 360
- Very high sound power
- Dust and weather sealing (when the impeller is mounted under the black ABS housing)
- molded aluminum body
Rotor, stator and lid in ABS
AS200M Series Industrial Sirens Industrial Sirens AS200M have been designed for a wide range of industrial signaling applications requiring a powerful and high power signal. The siren is equipped with a fractional power engine that causes an internal turbine to high speed, forcing air to pass through the split front cover, creating a single penetrating sound. The units offer a single-level alarm when powered, but they can be pulsed or modulated by simply putting power under / off to produce the classic sound of a "screaming" siren. The units are robust and suitable for use in difficult environmental conditions. The design allows a termination inside the housing via a conduit entry 1 x M20.
References Manufacturer: AS200-05MF
MOF0113
Data sheet
- Waterproofing protection (IP)
- Ip65
- Application / usage
- Industry
- Certificates
- THIS
- Frequency (Hz)
- 50 / 60hz
- Material
- ABS
- Body colors
- Black
- Number of sounds
- 1
- Ranting power
- 110db
- New
AS100M Industrial Mermaid
- Rated continuously
- Suitable for wall mounting or on post
- Omnidirectional cover at 360
- Very high sound power
- Dust and weather sealing (when the impeller is mounted under the black ABS housing)
- molded aluminum body
Rotor, stator and lid in ABS
- Suitable for wall mounting or on post
- Omnidirectional cover at 360
- Very high sound power
- Dust and weather sealing (when the impeller is mounted under the black ABS housing)
- molded aluminum body
Rotor, stator and lid in ABS
The AS100M Industrial Siren is designed for a wide range of industrial signaling applications where a powerful high output signal is required. The siren incorporates a fractional power motor that leads an internal high speed thruster forcing air through the slotted front cover creating its unique penetrating sound. The units offer a single-step alarm when turned on, but can be pulsed or modulated by simply putting the device under / off to produce the sound of the classic "Wailing" siren. The units are robust and suitable for use in difficult environmental conditions. The design allows the termination inside the speaker by the 1 x M20 entry.
References Manufacturer: AS100-04MF, AS100-05MF
MOF0112
Data sheet
- Waterproofing protection (IP)
- Ip65
- Application / usage
- Industry
- Certificates
- THIS
- Frequency (Hz)
- 50 / 60hz
- Body colors
- Black
- Number of sounds
- 1
- Ranting power
- 110db
- New
FLASH FIRE | STATIC LEDS100 series
- Rated continuously
- Long life of LEDs - Low current consumption
- Suitable for surface or wall mounting
- Cage protection available as an option - see accessories
- Fixing 2 studs
- 360O lighting around the vertical axis
- Resistant to dust and bad weather
- Polycarbonate lens stable UV
Plastic base ABS stable UV
- Long life of LEDs - Low current consumption
- Suitable for surface or wall mounting
- Cage protection available as an option - see accessories
- Fixing 2 studs
- 360O lighting around the vertical axis
- Resistant to dust and bad weather
- Polycarbonate lens stable UV
Plastic base ABS stable UV
LEDS100 Series (Stud Installation) LED Eco Industrial Tags The LEDS100 Economy Series is suitable for light commercial and industrial signaling applications where a local indication is needed. These tags have two selectable alarm levels, the flashing mode or the continuous mode (static), selectable by a jumper link on the printed circuit. The design also allows the connection of a third wire, which offers the ability to switch from a predefined static mode to a flashing mode. The LED Eco range has been designed primarily to provide a cost-effective solution with more traditional incandescent lamps, whether as part of a new installation or modernization of an existing facility. This design allows a termination inside the housing through the base of the tag, either directly from below or using a 6 mm at 90 ° cabling channel with respect to the base for surface wiring. The LEDS version includes two 2 x 5 mm mounting studs, spaced 45 mm.
References Manufacturer: LEDS100-01-01, LEDS100-01-02, LEDS100-01-04, LEDS100-02-01, LEDS100-02-02, LEDS100-02-04, LEDS100-03-01, leds100-03-02, leds100-03-04, leds100-05-01, leds100-05-02, leds100-05-04
MOF0111
Data sheet
- Waterproofing protection (IP)
- Ip65
- Application / usage
- Industry
- Certificates
- THIS
- Frequency (Hz)
- 50 / 60hz
- Material
- ABS
- Light source
- LED
- LED indicator
- 1¨
- New
Mini Flash Light / Static LED ECO
- Rated continuously
- Long LED
- Low current consumption
- ECONOMIC
- 360 ° lighting around the vertical axis
- Polycarbonate lens stable UV
Polycarbonate base stable UV
- Long LED
- Low current consumption
- ECONOMIC
- 360 ° lighting around the vertical axis
- Polycarbonate lens stable UV
Polycarbonate base stable UV
LED-mini series tag / stackable light The LED mini-modules are perfectly suitable for status indication in light commercial signaling applications where a local, compact and inexpensive signal is needed. These tags are of the continuous / static type (a single-level alarm). Once the tag is powered, the LEDs remain on permanently. The advantage of this type of operation is that it can be controlled by a remote source (control panel, automaton, etc.), which gives the tag a greater flexibility by offering a second-level alarm (flashing). The design is modular and assembles easily. The color modules are supplied with quick fixing endings that sufficient to push into the male terminals of the lower module to make the connection. The two mounting options of the base are available, foot and 100 mm pole or side support and 100 mm post. Each base is supplied with a flying cable of 1 meter.
References Manufacturer: LED-Mini-02-01, LED-Mini-02-02, LED-Mini-02-04, LED-Mini-Br100, LED-Mini-FT100
MOF0110
Data sheet
- Feed
- 12V DC
- Waterproofing protection (IP)
- Ip54
- Application / usage
- Industry
- Certificates
- THIS
- Material
- UV-resistant polycarbonate
- LED indicator
- 1¨
- New
Industrial LED and Marine LED Series LED701 / 700
- Rated continuously
- High bright yield
- Suitable for surface or wall mounting
120 ° of light intensity above the vertical axis
- High ambient temperature
- Bicolor LED option
- Ambient Light Detection Option - Longer life
- Resistant to dust and bad weather
- Polycarbonate lens stable UV
Polycarbonate base stable UV
- High bright yield
- Suitable for surface or wall mounting
120 ° of light intensity above the vertical axis
- High ambient temperature
- Bicolor LED option
- Ambient Light Detection Option - Longer life
- Resistant to dust and bad weather
- Polycarbonate lens stable UV
Polycarbonate base stable UV
LED701 / 700 Series Industry and Navy Tags The LED701 / 700 series is suitable for industrial and maritime signaling applications where a more powerful visual signal is needed. The unit incorporates 64 long-lasting extra brilliant LEDs and offers a high-performance and low-maintenance signaling solution. These tags have three preselectable alarm levels. A flashing mode at 60 or 120 FPM and a continuous (static) mode. They can be preset using a jumper on the printed circuit board. The design allows a command by a third wire that can switch from continuous mode to preset flashing mode. The termination is done inside the cabinet by duct trips on the sides of the unit and can incorporate M16 cable glands to M32. Cable glands.
References Manufacturer: LED701-02-01, LED701-02, LED701-02-03, LED701-02-05, LED700-05-01, LED700-05-02, LED700-05-03, LED700-05-04, LED700-05-05
MOF0109
Data sheet
- Waterproofing protection (IP)
- Ip66.ip67
- Application / usage
- Industry
- Certificates
- THIS
- Frequency (Hz)
- 50 / 60hz
- Material
- UV-resistant polycarbonate
- Body colors
- White
- Light source
- LED
- LED indicator
- 1¨
- New
AE20M series buzzer buzzer buzzer
- Rated continuously
- ECONOMIC
- Suitable only for panel mounting
- Two-tone sound option
- Large operating voltage
- Compact design
- The locking ring facilitates the installation
- ABS plastic
- ECONOMIC
- Suitable only for panel mounting
- Two-tone sound option
- Large operating voltage
- Compact design
- The locking ring facilitates the installation
- ABS plastic
The Piezo AE50M buzzer is ideal for vehicle reversing alarms or general signaling devices. Its compact and robust design provides IP67 protection, a large operating voltage, high sound output and a continuous tone standard. The unit comes with a mounting bracket and flying wires of 300 mm for fast and easy termination and installation.
References Manufacturer: AE20M-12, AE20M-24, AE20M-48, AE20M-115, AE20M-230, AE50M-02
MOF0107
Data sheet
- Ambiant temperature
- -20°C to +60°C
- Feed
- 12V DC
- Waterproofing protection (IP)
- Ip55
- Application / usage
- Industry
- Certificates
- THIS
- Frequency (Hz)
- 50 / 60hz
- Material
- ABS
- Body colors
- Black
- Number of sounds
- 2
- Ranting power
- 100db
- New
Alarm Bell Bell Series AB6
- Economic signal
- a distinctive sound
- Pressure molding construction
- Universal mounting plate
- supplied with flying cables of 150 mm
- Gong coated with powder
- IP44
- steel gong
Aluminum body
- a distinctive sound
- Pressure molding construction
- Universal mounting plate
- supplied with flying cables of 150 mm
- Gong coated with powder
- IP44
- steel gong
Aluminum body
AB6 Economy Bell Industrial Bells of the Solenoid Series The AB6 Economic Bell is a range of traditional bells that produce their distinctive sound by means of a solenoid-fed by a solenoid, repeatedly striking the inner edge of the Metal gong, producing a strong and clear sound. They are suitable for light commercial / industrial use where intermittent sound signaling is needed in a localized area. The bells can be mounted on any flat surface using either the four mounting holes embedded in the body of the molded part or the universal mounting plate and the seal (supplied as standard) that offer multiple fixing location options.
References Manufacturer: AB6-24DC, AB6-115AC, AB6-230AC, A6BM-12DC, A6BM-24DC, A6BM-24DCR, A6BM-115AC, A6BM- 230AC, A8BM-24DC, A8BM-24DCR, A8BM-115AC, A8BM-230AC
MOF0105
Data sheet
- Feed
- 24V DC
- Waterproofing protection (IP)
- Ip44
- Application / usage
- Industry
- Certificates
- THIS
- Frequency (Hz)
- 50 / 60hz
- Material
- Aluminum
- Body colors
- Light gray (RAL 7032)
- Number of sounds
- 1
- New
FLASH FIRE | STATIC LED80 series
- Long LED
- Very bright
- Rated continuously
- Large operating voltage
- 120 ° light intensity on the vertical axis
- Dust and submersible waterproof in water
- Lens and polycarbonate body stable in UV
- Very bright
- Rated continuously
- Large operating voltage
- 120 ° light intensity on the vertical axis
- Dust and submersible waterproof in water
- Lens and polycarbonate body stable in UV
LED80 / KMLED 75 Fire / Double Function Function The LED80 double-function tag incorporates 12 LEDs Ultra-light surface mounted, offering an economical solution for a wide range of general signaling solutions. Ideal for a local indication, the tag is controlled by two wires (flashing mode) or three wires (static mode). Tags are delivered fully assembled and ready to install immediately. The unit offers two mounting options, either on dowel or on the surface, using the two-part fastening plate. A plate is attached to the appropriate surface and the other at the tag, the two plates then engaging one in the other.
References Manufacturer: 98301,98302,98303,98304,98311,98312,98313,98314,98401,98402,98403,98404, 98405,98411,98412,98413,98414,98415,98421,98422,98423,98424,98425,98431, 98432,98433,98434,98435,98501,98502,98503,98504,98505,98511,98512,98513, 98514,98515,98521,98522,98523,98524,98525,98531,98532,98533,98534,98535
MOF0104
Data sheet
- Ambiant temperature
- -20°C to +55°C
- Feed
- 12-48V DC
- Waterproofing protection (IP)
- Ip67
- Application / usage
- Industry
- Certificates
- THIS
- Frequency (Hz)
- 50 / 60hz
- Material
- UV-resistant polycarbonate
- Light source
- LED
- LED indicator
- 1¨
- New
FLASE FLASH Series Series X80
- Rated continuously
- Large operating voltage
- 120 ° light intensity on the vertical axis
- Dust and submersible waterproof in water
- Polycarbonate lens stable UV
Polycarbonate base stable UV
- Large operating voltage
- 120 ° light intensity on the vertical axis
- Dust and submersible waterproof in water
- Polycarbonate lens stable UV
Polycarbonate base stable UV
X80 / KMX 75 Series (1-2 Joules) Fully Assembled Flashing Fire - Xenon Industrial Tags The X80 is a flashing-type tag (one-stage alarm) that suits a wide range of "local" signaling applications "requiring an economic and energy efficient solution. Xenon tags (sometimes called stroboscopes) are controlled by a printed circuit and emit a very brief but glossy white light flash and then discharging a large current through the Xenon gas. The unit is delivered fully assembled and ready to be installed. It offers two mounting options, on dowel or surface, using a two-part fixing plate provided. A plate is attached to the appropriate surface and the other at the tag, the two plates then engaging one in the other.
References Manufacturer: 98191,98192,98193,98194,9818198182,98201,98202,98203,98205
MOF0103
Data sheet
- Ambiant temperature
- -20°C to +55°C
- Feed
- 12-48V DC
- Waterproofing protection (IP)
- Ip67
- Application / usage
- Industry
- Certificates
- THIS
- Frequency (Hz)
- 50 / 60hz
- Material
- UV-resistant polycarbonate
- Light source
- Xenon
- New
Strong power alert siren AS400
- Rated continuously
- Suitable for wall mounting or on post
- Omnidirectional cover at 360
- Very high sound power
- Resistant to dust and weather (when the assembly is made according to the instructions)
- molded aluminum body and rotor in Noryl
- Suitable for wall mounting or on post
- Omnidirectional cover at 360
- Very high sound power
- Resistant to dust and weather (when the assembly is made according to the instructions)
- molded aluminum body and rotor in Noryl
AS400M / SO4 SERENNEL SERIENNS The AS400M siren range has been designed for a wide range of industrial signaling applications requiring a very powerful output signal. The sirens integrate a fractional power motor that causes a high speed to the high speed forcing air through the split front cover, creating a unique penetrating sound. The units offer a single-level alarm when powered, but they can be pulsed or modulated by simply switching on or off to produce the conventional sound of a "screaming" siren. The units are robust and suitable for use in difficult environmental conditions. The AS400M siren produces a low frequency sound that is perfect for the signaling of medium size areas. For maximum coverage, it is advisable to raise the unit over surrounding buildings. The design allows a termination inside the housing.
References Manufacturer: 81343
MOF0101
Data sheet
- Waterproofing protection (IP)
- Ip65
- Application / usage
- Industry
- Certificates
- THIS
- Frequency (Hz)
- 50 / 60hz
- Material
- Aluminum
- Body colors
- BLUE
- Number of sounds
- 1
- Ranting power
- 110db
- New
Built-in buzzer
- Rated continuously
- ECONOMIC
- Suitable only for panel mounting
- Two-tone sound option
- Large operating voltage
- Compact design
- The locking ring facilitates the installation
- ABS plastic
- ECONOMIC
- Suitable only for panel mounting
- Two-tone sound option
- Large operating voltage
- Compact design
- The locking ring facilitates the installation
- ABS plastic
AE20M Acoustic Signal Series BUZZER Piezo Miniature The range of miniature aE20M miniature alarms is a compact and inexpensive sound signaling solution for local indication where very low power consumption can be necessary. A threaded locking ring allows easy installation for all panel assemblies. The unit provides a single-level alarm, a pulsed quick tone, or a continuous tone, selectable by a combination of three-pin connections.
References Manufacturer: 76720,76721,76730,76731,76732,76733,76734,76735
MOF0099
Data sheet
- Ambiant temperature
- -20°C to +60°C
- Feed
- 12-48V DC
- Waterproofing protection (IP)
- Ip55
- Application / usage
- Industry
- Certificates
- THIS
- Frequency (Hz)
- 50 / 60hz
- Material
- ABS
- Body colors
- Black
- Number of sounds
- 2
- Ranting power
- 100db
- New
Buzzer ae30m buzzer
- Rated continuously
- ECONOMIC
- Suitable for panel or surface mounting
- Product a high quality sound
- Termination by male and female lugs
- Large operating voltage
- Compact design
- Material: ABS plastic
- ECONOMIC
- Suitable for panel or surface mounting
- Product a high quality sound
- Termination by male and female lugs
- Large operating voltage
- Compact design
- Material: ABS plastic
AE30M Series / Buzzer Buzzers Flat Head Thumbnail or Trumpet The AE30M Flat Top and Trumpet Top Bursters are suitable for automotive, safety and light industry applications where a local indication is needed. The buzzers offer a single-level alarm and produce a rich, high quality and low frequency signal compared to other piezo alarms. The slightly lower dB is more than compensated by the lower frequency of the product. Fixing a single point and compact design allow installation in most locations. The units are coded by color, black = 12Vdc and red = 24Vdc. These products were previously provided by Klaxon.
References Manufacturer: 76713,76714,76715,76716
MOF0097
Data sheet
- Ambiant temperature
- -20°C to +60°C
- Application / usage
- Industry
- Certificates
- THIS
- Material
- ABS
- Body colors
- Black
- Mounting type
- Projecting
- New
ATEX Acoustic Trunk TDE 450 Series
- Rated continuously
- Robust construction
- Very high sound power
- cover of 600 to 1000m
- Tone at very low frequency
- Large operating air pressure
- Suitable for wall mounting or on post
- Resistant to dust and bad weather
- Certification: II 2 GD EEX C IIC T6
- Homologation: Inex 10 ATEX 3002X
- Material
Brass horn with matte black finish
Stainless steel membrane
- Robust construction
- Very high sound power
- cover of 600 to 1000m
- Tone at very low frequency
- Large operating air pressure
- Suitable for wall mounting or on post
- Resistant to dust and bad weather
- Certification: II 2 GD EEX C IIC T6
- Homologation: Inex 10 ATEX 3002X
- Material
Brass horn with matte black finish
Stainless steel membrane
TDE Ex Series Air Drive Horned TDE Air Clear The Sound Alarms of the TDE EX range are pneumatic (non-electric) devices that must be powered by compressed air. They are suitable for industrial and marine environments where very high sound and very low frequency outputs are needed for signaling on medium-sized areas. These units produce the classic sound of the "mist horn" and are suitable for general signaling applications. The length of the trumpet determines the wavelength of the sound waves produced by the instrument and therefore the frequency of the rating produced. In general, the lower the frequency of the product produced is low, the more the sound spreads away. The EX TDEs are ATEX Inex 10 ATEX 3002x certified.
References Manufacturer: 72971X
MOF0091
Data sheet
- Ambiant temperature
- -30 ° C to + 90 ° C
- Waterproofing protection (IP)
- Ip66
- Application / usage
- ATEX zone
- ATEX protection mode
- Ex e (increased security)
- Certificates
- Atex.ce
- Material
- Nickel-plated brass
- Body colors
- Black
- Number of sounds
- 1
- Ranting power
- 110db
- New
TDE 450 Series Acoustic Trunk
- Rated continuously
- Robust construction
- Very high sound power
- cover of 600 to 1000m
- Tone at very low frequency
- Large operating air pressure
- Suitable for wall mounting or on post
- Resistant to dust and bad weather
- Material
Brass horn with matte black finish
Stainless steel membrane
- Robust construction
- Very high sound power
- cover of 600 to 1000m
- Tone at very low frequency
- Large operating air pressure
- Suitable for wall mounting or on post
- Resistant to dust and bad weather
- Material
Brass horn with matte black finish
Stainless steel membrane
TDE series TDE air drive horns TDE airenhrapors the TDE range are pneumatic (non-electric) devices that need to be powered by compressed air. They are suitable for industrial and marine environments where very high sound and very low frequency outputs are needed for signaling on medium-sized areas. These units produce the classic sound of the "mist horn" and are suitable for general signaling applications. The length of the trumpet determines the wavelength of the sound waves produced by the instrument and therefore the frequency of the rating produced. In general, the lower the frequency of the product produced is low, the more the sound spreads away.
References Manufacturer: 72971K
MOF0090
Data sheet
- Ambiant temperature
- -30 ° C to + 90 ° C
- Waterproofing protection (IP)
- Ip66
- Application / usage
- Industry
- Certificates
- THIS
- Material
- Nickel-plated brass
- Body colors
- Black
- Number of sounds
- 1
- Ranting power
- 110db
- New
FILE FLASH FIRE | Static LED-TL
- Rated continuously
- Robust construction
- Very high sound power
- cover of 600 to 1000m
- Tone at very low frequency
- Large operating air pressure
- Suitable for wall mounting or on post
- Resistant to dust and bad weather
- Certification: II 2 GD EEX C IIC T6
- Homologation: Inex 10 ATEX 3002X
- Material: brass horn with matte black finish
Stainless steel membrane
- Robust construction
- Very high sound power
- cover of 600 to 1000m
- Tone at very low frequency
- Large operating air pressure
- Suitable for wall mounting or on post
- Resistant to dust and bad weather
- Certification: II 2 GD EEX C IIC T6
- Homologation: Inex 10 ATEX 3002X
- Material: brass horn with matte black finish
Stainless steel membrane
TDE Ex Series Air Drive Horned TDE Air Clear The Sound Alarms of the TDE EX range are pneumatic (non-electric) devices that must be powered by compressed air. They are suitable for industrial and marine environments where very high sound and very low frequency outputs are needed for signaling on medium-sized areas. These units produce the classic sound of the "mist horn" and are suitable for general signaling applications. The length of the trumpet determines the wavelength of the sound waves produced by the instrument and therefore the frequency of the rating produced. In general, the lower the frequency of the product produced is low, the more the sound spreads away. The EX TDEs are ATEX Inex 10 ATEX 3002x certified.
References Manufacturer: 69851
MOF0087
Data sheet
- Ambiant temperature
- -30 ° C to + 90 ° C
- Waterproofing protection (IP)
- Ip66
- Application / usage
- Industry
- Certificates
- Atex.ce
- Material
- Nickel-plated brass
- Body colors
- Black
- Ranting power
- 110db
- New
FILE FLASH FIRE | Static LED-TL
- Rated continuously
- Long duration and extra luminous LED
- Low current consumption
- Suitable for a wall mounting or in a conduit box
120 ° of light intensity above the vertical axis
- Multiple modular construction option
- mounting option on 1, 2 or 3 supports
- Resistant to dust and bad weather
- Plastic Base ABS Stable UV
Lens and polycarbonate hood stable UV
- Long duration and extra luminous LED
- Low current consumption
- Suitable for a wall mounting or in a conduit box
120 ° of light intensity above the vertical axis
- Multiple modular construction option
- mounting option on 1, 2 or 3 supports
- Resistant to dust and bad weather
- Plastic Base ABS Stable UV
Lens and polycarbonate hood stable UV
TL LED Series (Surface Mount) / KMLED Industrial LED Traffic The LED-TL series traffic lights (surface mount) were designed for industrial and commercial applications requiring a long-term economic solution and Requiring little maintenance for parking management, traffic control in factories and automated door control systems and portals. Traffic lights are suitable for indoor or exterior applications and incorporate 36 high efficiency LEDs. They can be surface mounted on any flat vertical surface or on a conduit housing and used as a standalone module. The modular design of the traffic lights also allows the installer to pre-assemble multiple units to create a multiple indication lights system. Each unit is delivered as standard with all the components needed for the multiple assembly for surface installation. These units require external input signals or a PLC command to switch the visual indication functions (not supplied). However, the orange light has an optional jumper on the printed circuit board that allows the unit to flash when it is turned on. The termination of the cables is inside the housing and is accessible by the 2 M20 duct trips (up or down) or by the M20 duct inlet at the back.
References Manufacturer: 69801,69802,69804,69806,69807,69811,69812,69814,69816,69817, 69821,69822,69824,69826,69827,69831,69832,69834,69836,69837
MOF0086
Data sheet
- Feed
- 12-48V DC
- Waterproofing protection (IP)
- Ip65
- Application / usage
- Industry
- Certificates
- THIS
- Frequency (Hz)
- 50 / 60hz
- Material
- PC / ABS
- Light source
- LED
- LED indicator
- 1¨
- New
Alarm Sound Bell Ringtone 66
- Anti-sabotage gong bolt
- EN 45545-2: 2013 + A1: 2016 6 "Complies for installation on railways
- IEC 60533: 1999 compliant for installation on vessels
- EN 50130-4: 2011 compliant for alarm systems
- Resistant to dust and bad weather
- Material: Polyamide 6 stable UV 30% GF.FR. UL94 V-0 Gong Steel Covered with Zinc Powder
- EN 45545-2: 2013 + A1: 2016 6 "Complies for installation on railways
- IEC 60533: 1999 compliant for installation on vessels
- EN 50130-4: 2011 compliant for alarm systems
- Resistant to dust and bad weather
- Material: Polyamide 6 stable UV 30% GF.FR. UL94 V-0 Gong Steel Covered with Zinc Powder
IP66 Series Industrial / Marine Bell The new range of 6 "and 8" electromagnetic IP66 bells has been designed and manufactured to withstand difficult environmental conditions. and marine where a robust construction and high weather resistance classification are required. The bells produce a rich and clear "traditional" alarm bell sound, without mechanical noise. The design allows up to 4 M20 cable entries, two from the top and one on each side to allow looping wiring applications. The termination is inside the housing and can accommodate 4 2.5 mm2 cables.
References Manufacturer: 69000,69001,69006,69008,69009
MOF0085
Data sheet
- Ambiant temperature
- -25 °C / +50 °C
- Waterproofing protection (IP)
- Ip66
- Application / usage
- Industry
- Certificates
- THIS
- Frequency (Hz)
- 50 / 60hz
- Number of sounds
- 1
- New
Flash Fire | Static Leda125 Series
- Rated continuously
- Long-life LEDs and very bright
- Suitable for surface or wall mounting
- Optional wall and protection media - See accessories
- 3-point fixation
- 360 ° lighting around the vertical axis
- Resistant to dust and bad weather
- Polycarbonate lens stable UV
- Plastic Base ABS Stable UV
- Long-life LEDs and very bright
- Suitable for surface or wall mounting
- Optional wall and protection media - See accessories
- 3-point fixation
- 360 ° lighting around the vertical axis
- Resistant to dust and bad weather
- Polycarbonate lens stable UV
- Plastic Base ABS Stable UV
LEDA125 series / KMLED 125 LED multifunctional industrial tags with two piezoelectric buzzers The LEDA125 series is suitable for security, process and industrial control applications, where low maintenance and long duration of life are the prerequisites required. These tags offer a three-level alarm option, selected by a jumper link on the printed circuit board: FILE mode flashing mode at 1Hz Flashing mode at 2Hz The advantage of the continuous mode can be controlled by a remote source (it is to say a control panel / plc, etc.), which offers the possibility of a remote flash option. The design of the DC unit allows a termination inside the housing via an M12 seal in the base. The AC units are supplied with a flying cable of 1 meter. The LEDA version incorporates two piezoelectric buzzers located at the base of the unit and synchronized with the lighting mode (the buzzers can be controlled separately from the lighting on the DC version only), thus providing a sound warning device. And combined visual.
References Manufacturer: 67710
MOF0083
Data sheet
- Feed
- 24V DC
- Waterproofing protection (IP)
- Ip65
- Application / usage
- Industry
- Certificates
- THIS
- Frequency (Hz)
- 50 / 60hz
- Material
- PC / ABS
- Number of sounds
- 1
- Light source
- LED
- Ranting power
- 100db
- LED indicator
- 1¨
- New
FLASH XENON X200 FLASH FIRE
- Rated continuously
- High bright yield
- X201 / 200: Suitable for surface mounting, in a conduit box or wall
- Optional wall and protection media - See accessories
- Fixing in 2 points
- 360 ° lighting around the vertical axis
- 180 ° lighting above the horizontal axis
- Resistant to dust and bad weather
- Polycarbonate lens stable UV
- Plastic Base ABS Stable UV
- High bright yield
- X201 / 200: Suitable for surface mounting, in a conduit box or wall
- Optional wall and protection media - See accessories
- Fixing in 2 points
- 360 ° lighting around the vertical axis
- 180 ° lighting above the horizontal axis
- Resistant to dust and bad weather
- Polycarbonate lens stable UV
- Plastic Base ABS Stable UV
X201-200 / KMX 200 Series (10 Joules) Single or Double Xenon Industrial Fires Flashing The X201-200 series is suitable for general industrial safety and signaling applications that require a more robust and powerful signal. Xenon tags (sometimes called stroboscopes) are controlled by a printed circuit and emit a very bright white light flash, and very bright in ionizing and then discharging an important current through the xenon gas. The design allows a termination inside the housing. This range of tags integrates an internal Fresnel lens designed to maximize the light intensity and has a double flash option (activated by a slide switch on the printed circuit circuit) extending the duration of the signal, making it more perceptible to the human eye. The CC unit is set at the factory on 24 V, but a zipper on the printed circuit board makes it possible to operate it in 12 V.
References Manufacturer: 67381,67382,67383,67384.67385.67311,67312,67313,67314,67315, 67321,67322,67323,67324,67325,67331,67332,67333,67334,67335
MOF0082
Data sheet
- Feed
- 12V AC / DC
- Waterproofing protection (IP)
- Ip65
- Application / usage
- Industry
- Certificates
- THIS
- Frequency (Hz)
- 50 / 60hz
- Material
- PC / ABS
- LED indicator
- 1¨
- New
FLASH FIRE | STATIC LEDD100 series
- Rated continuously
- Long LED
- Low current consumption
- Suitable for surface or wall mounting
- Optional wall and protection media - See accessories
- 3-point fixation
- 360 ° lighting around the vertical axis
- Resistant to dust and bad weather
- Polycarbonate lens stable UV
Plastic base ABS stable UV
- Long LED
- Low current consumption
- Suitable for surface or wall mounting
- Optional wall and protection media - See accessories
- 3-point fixation
- 360 ° lighting around the vertical axis
- Resistant to dust and bad weather
- Polycarbonate lens stable UV
Plastic base ABS stable UV
LEDD100 / KMLED series 100 Industrial Tags LED Eco The LEDD100 Economic Series is suitable for light commercial and industrial signaling applications where a local indication is needed. These tags have two selectable alarm levels, flashing mode or continuous (static) mode, selectable by a jumper link on the printed circuit board. The design also allows the connection of a third wire, which offers the ability to switch from a predefined static mode to a flashing mode. The LED Eco range has been designed primarily to provide a cost-effective solution with more traditional incandescent lamps, whether as part of a new installation or modernization of an existing facility. The design allows a termination inside the housing through the base of the housing of the tag.
References Manufacturer: 66841,66842.66844.66851.66852.66854.6686864.66871.66872.66874
MOF0081
Data sheet
- Waterproofing protection (IP)
- Ip65
- Application / usage
- Industry
- Certificates
- THIS
- Frequency (Hz)
- 50 / 60hz
- Material
- PC / ABS
- LED indicator
- 1¨
- New
Industrial Mermaid AS300
- Rated continuously
- Suitable for wall mounting or on post
- Omnidirectional cover at 360
- Very high sound power
- Resistant to dust and weather (when the assembly is made according to the instructions)
- ABS construction
- Suitable for wall mounting or on post
- Omnidirectional cover at 360
- Very high sound power
- Resistant to dust and weather (when the assembly is made according to the instructions)
- ABS construction
The AS300M siren range has been designed for a wide range of industrial signaling applications where a very powerful output signal is needed. The sirens incorporate a fractional power motor that leads an internal turbine with high speed forcing air through the slotted front cover creating its unique penetrating sound. The units offer a single-step alarm when turned on, but can be pulsed or modulated by simply putting the device under / off to produce the sound of the classic "Wailing" siren. The units are robust and suitable for use in difficult environmental conditions. The AS300M is supplied with a 1m flight head.
References Manufacturer: 23580,23581,23582
MOF0073
Data sheet
- Waterproofing protection (IP)
- Ip55
- Application / usage
- Industry
- Certificates
- THIS
- Frequency (Hz)
- 50 / 60hz
- Material
- ABS
- Body colors
- Yellow
- Ranting power
- 110db
