Previous
Next

Flame detector UV/IR-210/1CZ

€0.00

OGGIONI flame detectors use a microprocessor for the analysis of sophisticated electronic signals.

The UV/IR and IR3 flame detector uses the analysis of the flame flicker frequency as an additional alarm criterion. UV/IR and

IR3 flame detectors have good false alarm rejection. UV is immune to virtually all false alarm sources except arc welding. .

  Garanties sécurité

(à modifier dans le module "Réassurance")

  Politique retours

(à modifier dans le module "Réassurance")

  Politique de livraison

(à modifier dans le module "Réassurance")

 

12-24 VDC (10-28 VDC) power supply

Normal Current 25 mA at 24 VDC

Alarm in progress, at 24 Vdc +/- 75 mA per 24 Vdc

Startup time <10 s

Alarm output setting LED and selectable relays latch/no latch, factory setting: latch

Standard current output available 0-20 mA (stepped, sinking, non-isolated)

Alarm response time <10 sec.

Cone of vision of at least 90°

Glass-reinforced polyester (GRP) housing, cover screw tightening torque 2 nm minimum

IP65 ingress protection

Operating temperature Da -40 °C to +70 °C (da -40 °F to +158 °F)

Ambient temperature ATEX and FM 3611: -25 °C to +70 °C (-13 °F to +158 °F)

Automatic and manual automatic sensor test (integrated automatic test) and manual self-test

Dimensions 125 x 80 x 57 mm (4.9 x 3.15 x 2.25 in)

Weight: 465 gr (1.05 lb)

M20 cable gland (cable conduit diameter 5.5-13 mm, two stages 5.5-8 mm and 8-13 mm)

Certification ATEX EN54-10
Operating temperature range -40 to +70°C

Products in the same category

Complementary products

Robust and durable

Modular

Ease of installation and maintenance

5 year warranty

Availability