Data sheet
- Certified ATEX & IEC EX - ZONE 1/21
- Stainless steel variant also available
- IP 66/67
- up to 115dB
- 59 Sounds proposed
- Xenon or LED
- Standards: EN (IEC) 600790 / EN (IEC) 600791 / EN 54
This sound and bright combined alarm SB150-2 / 3/4 is composed of a siren and several flash lights (4 maximum). It is certified for the ATEX zones of 1 to 2 for the gas and 21 to 22 for dust. It is dedicated for the oil & gas, chemistry, petrochemicals, pharmacy, navy, and all offshore applications. It has been developed for corrosive environments and explosive areas. Short lights are proposed in 2 technologies. LED fixed fire, flashing, turning different powers. Flash with Xenon tube of different powers. Four flashing frequencies are selectable. For the siren, it is possible to select 1 tone among the 59 pre-recorded, including the main usual alarm tones. The bright tags and the siren can be triggered in a common or independent manner.The whole is molded in fiberglass reinforced polyester (GRP), tinted in the mass and protected by a highly resistant UV paint, the Verrine is borosilicate glass of different shades. The assembly is assembled on a 316L stainless steel plate. Optionally it is possible to integrate the triggering of the siren or tags with a telephone line. On request one of the bright tags can be replaced by a push button or a junction box and specific customer tones can be prerecorded at the factory. A complete offer of accessories allows you to customize the products.
Data sheet
- Stainless steel handset for zone 1, 21
- Certified ATEX and IEC EX - Zone 1, 2, 21, 22
- GRP variant also available IP 66/67
- Up to 115dB 59 Sounds proposed Xenon or LED Standards: EN (IEC) 600790 / EN (IEC) 600791 / EN 54
This signaling set SB125-2 / 3 / 4J is composed of a siren and several light tags (maximum 4). It is certified for the ATEX zones of 1 to 2 for the gas and 21 to 22 for dust. It is dedicated for the oil & gas, chemistry, petrochemicals, pharmacy, navy, and all offshore applications. It has been developed for corrosive environments and explosive areas. The tags are offered in 2 technologies. LED fixed fire, flashing, turning different powers. Flash with Xenon tube of different powers. Four flashing frequencies are selectable. For the siren, it is possible to select 1 tone among the 59 pre-recorded, including the main usual alarm tones. The bright tags and the siren can be triggered in a common or independent manner. The assembly is molded and machined in AISI 316L stainless steel covered with a highly resistant UV paint, the verrine is borosilicate glass of different shades, the assembly is assembled on a 316L stainless steel plate. Optionally it is possible to integrate the triggering of the siren or tags with a telephone line. On request one of the bright tags can be replaced by a push button or a junction box and specific customer tones can be prerecorded at the factory. A complete offer of accessories allows you to customize the products.
Data sheet
- IP66,67
- ATEX Certified and IEC Ex - Zone 1, 2 and 21, 22
- Xenon version or LED body stainless steel AISI 316L
- Finishing color: red, blue, black, other colors on demand
- wide operating temperature range -40 ° to + 70 ° 2 years warranty
The BC125 explosion-proof heat is certified ATEX / IECEX for use in potentially explosive atmospheres. It allows to report alarms, alert potential hazard staff or report the need for immediate emergency response. The BC125 can also be used as an element of a status signaling system.
Data sheet
Data sheet
- Certified ATEX and IEC EX - Zone 1, 2, 21, 22
- Stainless steel variant also available
- IP 66/67
- up to 115dB
- 59 Sounds proposed
- Xenon or LED
- Standards: EN (IEC) 600790 / EN (IEC) 600791 / EN 54
This SB150-1 sound and optical combined warning is certified for ATEX 1-2 zones for gas and 21 to 22 for dust. It is dedicated for the oil & gas, chemistry, petrochemicals, pharmacy, navy, and all offshore applications. It has been developed for corrosive environments and explosive areas. Bright fire is proposed in 2 technologies. LED fixed fire, flashing, turning different powers. Flash with Xenon tube of different powers. Four flashing frequencies are selectable. For the siren, it is possible to select 1 tone among the 59 pre-recorded, including the main usual alarm tones. The luminous tag and siren can be triggered in a common or independent manner. Optional it is possible to integrate the trigger of the siren or the tag with a telephone line. The set is molded polyester reinforced with fiberglass (GRP), tinted in the mass and protected by a highly resistant UV paint, the verrine is brightly borosilicate glass at the request of specific customer-specific tones can be Pre-recorded factory A complete offer of accessories allows you to customize the products.
Data sheet
- Certified ATEX and IEC EX - Zone 1, 2, 21, 22
- LED version 5W or 10W and Xenon 5J, 10J, 15J and 21J
- wide operating temperature range -40 ° to + 70 °
- 3 color finishing colors (more on request)
- High UV resistance
- Borosilicate verrine red, yellow (amber), blue, green, clear
- Degree of protection IP66 / 67
The BC150 e-feeding light is ATEX / IECEX certified for use in potentially explosive atmospheres. It allows to report alarms, alert potential hazard staff or report the need for immediate emergency response. The BC150 can also be used as an element of a status signaling system.
Data sheet
Data sheet
Data sheet
- Certified ATEX & IEC EX - Zone 1/21 & 2/22 II 2G EEXD IIC T4 ~ T6
- GRP variant also available
- IP 66/67 up to 115db
- 12 / 48V DC or 100/240V AC
- 59 Sounds proposed
- Customizable Sounds Standards: EN (IEC) 600790 / EN (IEC) 600791 / EN 54
The SD125 Anti-Screening Sound Alarm is Certified ATEX / IECEX for use in potentially explosive atmospheres and transmits powerful warning sounds to report alarms in difficult hazardous areas. It quickly alerts potential hazard staff or reports the need for immediate emergency response. It is made of 316L stainless steel.
Data sheet
- Certified ATEX & IEC EX - ZONE 1/21 II 2G EEXD IIC T4 ~ T6
- Stainless steel variant also available IP 66/67
- Up to 115dB 12/48V DC or 100/240V AC 59 Sounds proposed
- Customizable sounds
- Standards: EN (IEC) 600790 / EN (IEC) 600791 / EN 54
The SD150 Anti-Screening Alarm is Certified ATEX / IECEX for use in potentially explosive atmospheres and issues powerful warning sounds to report alarms in difficult hazardous areas. It quickly alerts potential hazard staff or reports the need for immediate emergency response. It is made in PRV.
Data sheet
Data sheet
Data sheet
Data sheet