List of products by brand OGGIONI
TMP2 conventional heat detectors
- IP66
- intended for use in dangerous industrial zones
- Protective coating for PCB
- Short circuit insulator
- Complies with the EMC Directive
- Immunity with electromagnetic disturbances
- High reliability thanks to a self-diagnosis procedure
- Programmable LED for status indication
- Temperature setpoint levels of -20 ° C to 110 ° C.
- Configurable classes A1, A2, B, C, D
- intended for use in dangerous industrial zones
- Protective coating for PCB
- Short circuit insulator
- Complies with the EMC Directive
- Immunity with electromagnetic disturbances
- High reliability thanks to a self-diagnosis procedure
- Programmable LED for status indication
- Temperature setpoint levels of -20 ° C to 110 ° C.
- Configurable classes A1, A2, B, C, D
Certified ATEX ZONE 1 II 2G EX D IIC T6 and certified EN54-5 for temperatures A2 (54 ° to 70 ° C) and C (84 ° to 100 ° C) heat detector. Rate of climb and / or static alarm. LED status: OFF in normal condition, we alarm. Or Pulse in normal condition, OFF in fault condition, ON in alarm condition. Automatic or manual reset. IP65 aluminum alloy case with chrome brass window and probe (stainless steel available). A 1/2 "NPT lane connection opposite to the probe side (OJ model) or two 1/2" NPT channel connections on both sides (model to).
References Manufacturer: TMP2-J- ..., TMP2-T- ..., TMP2-J-XXX / AA, TMP2-JO- ..., TMP2-TO- ..., TMP2-D- ...
OGG0009
Data sheet
- Ambiant temperature
- -20°C to +110°C
- Temperature class
- T6
- Warranty
- 3¨
- Waterproofing protection (IP)
- Ip66
- Application / usage
- ATEX zone
- ATEX zone
- Zone 1/21
- Gas class
- IIC
- ATEX protection mode
- Ex d (explosion)
- Body colors
- Red
- LED indicator
- 1¨
- Type of detection
- Opto-thermal
- -40 ° C to + 85 ° C
- 1
GDA-TK test and calibration kits
Test and calibration kit: The kit consists of a polypropylene tool bag comprising: two gaseous mixing cans (34 liters at 34 bar) containing calibration gas at a specific concentration, a control valve for Canopy with pressure indicator, a gas detector calibration adapter, a 30 cm polyurethane pipe and a calibration magnet.
References Manufacturer: GDA-TK-01, GDA-TK-04, GDA-TK-20-XXX, GDA-TK-27, GDA-TK-40-XXX, GDA-TK-61-18, GDA-TK- 61-15, GDA-TK-N2, GDA-TK-69-XXX, GDA-TK-79-5K, GDA-TK-79-10K, GDA-TK-MIX-1,45, GDA-TK-MIX- 2,2, GDA-TK
OGG0005
Data sheet
- Warranty
- 3¨
- Application / usage
- ATEX zone
RAS / AD gas detectors
- IP65
- Based on a microprocessor
- Output from 4 to 20 mA and / or
- Three outputs of relay contacts without tension
- RS-485 Modbus RTU Series Interface or Protocol for Remote Control and Maintenance
- LCD display of 8x2 characters
- Calibration procedure "A person" non-intrusive
- Fully programmable
- small and low energy consumption
- ATEX II CERTIFICATE 2G EX D IIC T6
- Based on a microprocessor
- Output from 4 to 20 mA and / or
- Three outputs of relay contacts without tension
- RS-485 Modbus RTU Series Interface or Protocol for Remote Control and Maintenance
- LCD display of 8x2 characters
- Calibration procedure "A person" non-intrusive
- Fully programmable
- small and low energy consumption
- ATEX II CERTIFICATE 2G EX D IIC T6
Certified ATEX gas detector II 2 g EX d ic T6, aluminum or stainless steel alloy case, IP65 protection index. Available outputs: 4-20mA or relay, RS485.
References Manufacturer: RAS / AD / 1XX / AAS, RAS / AD / 1XX / CCS, RAS / AD / 1XXS / AAS, RAS / AD / 1XXS / CCS, RAS / AD / 141S / ASA, RAS / AD / 141S-1 / AAS, RAS / AD / 141S / CCS, RAS / AD / 141S-1 / CCS, RAS / AD / 2XX / ASA, RAS / AD / 2XX / CCS, RAS / AD / 2XXD ,,, / AAS, RAS / AD / 2XXD ,,, / CCS, RAS / AD / 279 / AAS, RAS / AD / 279-2 / ASA, RAS / AD / 279 / CCS, RAS / AD / 279-2 / CCS, RAS / AD / 279D ,,, / AAS, RAS / AD / 279D ,,,, / CCS, RAS / AD / 361 / AAS, RAS / AD / 361 / CCS, RAS / AD / 361 + / CCS, RAS / AD / 320 / AAS, RAS / AD / 320-1 / AAS, RAS / AD / 320-2 / AAS, RAS / AD / 369 / AAS, RAS / AD / 369-1 / AAS, RAS / AD / 369-2 / AAS, RAS / AD / 369-3 / ASA, RAS / AD / 340 / AAS, RAS / AD / 340-1 / AAS, RAS / AD / 340-2 / AAS, RAS / AD / 340-4 / AAS, RAS / AD / 327 / AAS, RAS / AD / 327-1 / AAS, RAS / AD / 370 / AAS, RAS / AD / 370-1 / AAS, RAS / AD / 369 / AAS, RAS / AD / 320 / CCS, RAS / AD / 320-1 / CCS, RAS / AD / 320-2 / CCS, RAS / AD / 369 / CCS, RAS / AD / 369-1 / CCS, RAS / AD / 369-2 / CCS, RAS / AD / 369-3 / CCS, RAS / AD / 340 / CCS, RAS / AD / 340-1 / CCS, RAS / AD / 340-2 / CCS, RAS / AD / 340-3 / CCS, RAS / AD / 340-4 / CCS, RAS / AD / 327 / CCS, RAS / AD / 327-1 / CCS, RAS / AD / 370 / CCS, RAS / AD / 370-1 / CCS, RAS / AD / 369 / CCS, RAS / AD / 571 / ASA, RAS / AD / 571-1 / AAS, RAS / AD / 571-2 / AAS, RAS / AD / 571 / CCS, RAS / AD / 571-1 / CCS, RAS / AD / 571-2 / CCS
OGG0001
Data sheet
- Ambiant temperature
- -20 ° C to 40 ° C
- Temperature class
- T6
- Warranty
- 3¨
- Feed
- 24V DC
- Waterproofing protection (IP)
- Ip65
- Application / usage
- ATEX zone
- ATEX zone
- Zone 1/21
- Gas class
- IIC
- ATEX protection mode
- Ex d (explosion)
- Certificates
- Atex.iecex
- Material
- Aluminum
- Body colors
- Gray metallic
- Type of detection
- Gas
- -40 ° C to + 85 ° C
- 1
Adaptateur de débit de tête
€603.00
Tax excluded
RAS, Dust and Park head-rate adapter for calibration and testing. Complete with fast connector.
References Manufacturer: GDA-ECO524M-ATC
GDA
CM-80T4N-M-B Addressable Gas Control Panel
- IP20 & 66
- Eight analog inputs for transmitters of 4-20 mA.
- Two optocoupled digital inputs.
- backup battery circuit
- Backlit LCD display of 2 lines x 20 characters for the viewing of the main information on site.
- Front panel with graphic indications.
- SD Configuration Card
- Eight analog inputs for transmitters of 4-20 mA.
- Two optocoupled digital inputs.
- backup battery circuit
- Backlit LCD display of 2 lines x 20 characters for the viewing of the main information on site.
- Front panel with graphic indications.
- SD Configuration Card
8 analog inputs 4-20. no. 2 opto-isolated digital inputs. no. 6 programmable relay outputs. N.2 Series RS-485 (optional fiber optic driver) for communication with the Central Units Excerta or CM-80T4-ID. 220 VAC power supply. Open frame for din rail mounting or 19 "rack version available.
References Manufacturer: CM-80T4N-M-B
0GG0021
Data sheet
- Warranty
- 3¨
- Waterproofing protection (IP)
- Ip20.ip66
- Application / usage
- Industry
Power supply for CM-20T5
Programmable control unit for wall mounting. N.2 Analog inputs 4-20 mA. N.4 Relay outputs for activation of alarm devices, internal buzzer. 220VAC power supply. To be used in safe zone, security key for configuration or resetting the alarm.
References Manufacturer: CM-20T5-PB
OGG0016
Data sheet
- Warranty
- 3¨
- Application / usage
- Industry
Multitasking Controller Excerta
Multitasking controller will exace in with double microprocessor. Fully programmable, it supports redundant configurations to achieve SIL1 / SIL2 safety integrity levels. 8 analog inputs 4-20mA. 8 opto-isolated digital inputs. 8 programmable relay outputs. Local TFT 7 "Local Touch Screen or HDMI output for external screen. 4 RTU RTU RTU Configurable or Closed Loop Modbus. Max 250 loop appliances. 1 RS-485 port dedicated to the connection with external control systems (for example: BMS, DCS ECC ...). Programming by equation, possibility of voting, test menu for all connected devices. Identification of the calibration mode of gas detectors. Available in open frame version for din rail mounting.
References Manufacturer: Excertera-L, Excerta-L / O, Excertera-LD, Excertera-LD / O, Excertera-Park4.0
OGG0013
Data sheet
- Warranty
- 3¨
- Application / usage
- Industry
2AL34 Non-refillable Gas Cylinders
€289.80
Tax excluded
"Non-rechargeable" aluminum can containing a gas sample at a known concentration for functional tests and gas detector calibration. Available in 58 liters at 34 bar (capacity 1.7 liters). Regulator connection 5/8 "U16 (C10).
References Manufacturer: 2Al34-01-2,2,2AL34 / 04-0.85,2AL34 / 20-XXX, 2AL34 / 27-2.2AL34R / 40-XXX, 2Al34 / 61-18,2AL34 / 61-15,2AL34 / N2.2AL34R / 69-XXX, 2Al34 / 79-5K, 2Al34 / MIX1,45,2AL34 / MIX2,2
OGG0006
Data sheet
- Warranty
- 3¨
- Application / usage
- ATEX zone
RAS / DY gas detectors
- IP66
- Based on a microprocessor
- Three outputs of relay contacts without tension
- RS-485 Modbus RTU Series Interface or Protocol for Remote Control and Maintenance
- LCD display of 8x2 characters
- Calibration procedure "A person" non-intrusive
- Fully programmable
- small and low energy consumption
- ATEX II CERTIFICATE 2G EX D IIC T6
- Based on a microprocessor
- Three outputs of relay contacts without tension
- RS-485 Modbus RTU Series Interface or Protocol for Remote Control and Maintenance
- LCD display of 8x2 characters
- Calibration procedure "A person" non-intrusive
- Fully programmable
- small and low energy consumption
- ATEX II CERTIFICATE 2G EX D IIC T6
Certified ATEX gas detector II 2 g EX d ic T6, aluminum or stainless steel alloy case, IP65 protection index. With display. Available outputs: 4-20mA or relay, RS485.
References Manufacturer: RAS / DY / 1XX / AAS, RAS / DY / 1XX / CAS, RAS / DY / DY / 1XXS / CAS, RAS / DY / 141S / AAS, RAS / DY / DY / 141S-1 / AAS, RAS / DY / 141S / CAS, RAS / DY / 141S-1 / CAS, RAS / DY / 2XX / AAS, RAS / DY / 2XX / CAS, RAS / DY / 2XXD ,,, / AAS, RAS / DY / 2XXD ,,,, / CAS, RAS / DY / 279 / AAS, RAS / DY / 279-2 / AAS, RAS / DY / 279 / CAS, RAS / DY / 279-2 / CAS, RAS / DY / 279D ,,, / AAS, RAS / DY / 279D ,,, / CAS, RAS / DY / 361 / AAS, RAS / DY / 361 / CAS, RAS / DY / 361 + / CAS, RAS / DY / 320 / ASA, RAS / DY / 320-1 / AAS, RAS / DY / 320-2 / AAS, RAS / DY / 369 / AAS, RAS / DY / 369-1 / AAS, RAS / DY / 369-2 / AAS, RAS / DY / 369-3 / AAS, RAS / DY / 340 / AAS, RAS / DY / 340-1 / AAS, RAS / DY / 340-2 / AAS, RAS / DY / 340-4 / AAS, RAS / DY / 327 / AAS, RAS / DY / 327-1 / AAS, RAS / DY / 370 / AAS, RAS / DY / 366 / AAS, RAS / DY / 339 / AAS, RAS / DY / 320 / Case, RAS / DY / DY / 320-1 / Case, RAS / DY / 320-2 / Case, RAS / DY / 369 / Case, RAS / DY / 369-1 / Case, RAS / DY / 369-2 / Case, RAS / DY / 369-3 / Case, RAS / DY / 340 / Case, RAS / DY / 340-1 / Case, RAS / DY / 340-2 / Case, RAS / DY / 340-4 / Case, RAS / DY / 327 / Case, RAS / DY / 327-1 / Case, RAS / DY / 370 / Case, RAS / DY / 370-1 / Case, RAS / DY / 339 / Case, RAS / DY / 571 / AAS, RAS / DY / 571-1 / AAS, RAS / DY / 571-2 / AAS, RAS / DY / 571 / Case, RAS / DY / 571-1 / Case, RAS / DY / 571-2 / Case
OGG0002
Data sheet
- Ambiant temperature
- -40 ° C to + 85 ° C
- Temperature class
- T6
- Warranty
- 3¨
- Waterproofing protection (IP)
- Ip66
- Application / usage
- ATEX zone
- Gas class
- IIC
- ATEX protection mode
- Ex of
- Certificates
- Atex.iecex
Cable input plate for CM-80T4N-B
References Manufacturer: KEL-DPU24 / 21
OGG0023
Data sheet
- Warranty
- 3¨
- Application / usage
- Industry
CM-80T4N Programmable Detection Center
- IP20 and 66
- 8 analog inputs for 4-20 mA transmitters
- Two optocoupled digital inputs.
- backup battery circuit
- Backlit LCD display of 2 lines x 20 characters for the viewing of the main information on site.
- Front panel with graphic indications.
- SD Configuration Card
- 8 analog inputs for 4-20 mA transmitters
- Two optocoupled digital inputs.
- backup battery circuit
- Backlit LCD display of 2 lines x 20 characters for the viewing of the main information on site.
- Front panel with graphic indications.
- SD Configuration Card
8 analog inputs 4-20. no. 2 opto-isolated digital inputs. no. 6 programmable relay outputs. N.2 Series RS-485 (optional fiber optic driver) for communication with the Central Units Excerta or CM-80T4-ID. 220 VAC power supply. Open frame for din rail mounting or 19 "rack version available.
References Manufacturer: CM-80T4N, CM-80T4N-E, CM-80T4N-B, CM-80T4N-E-B
OGG0017
Data sheet
- Warranty
- 3¨
- Waterproofing protection (IP)
- Ip20.ip66
- Application / usage
- Industry
- LED indicator
- 1¨
8AL58 Non-refillable Gas Cylinders
€310.50
Tax excluded
"Non-rechargeable" aluminum can containing a gas sample at a known concentration for functional tests and gas detector calibration. Available in 34 liters at 34 bars (capacity 1 liter). Regulator connection 5/8 "U16 (C10).
References Manufacturer: 8AL58-01-2,2,8AL58 / 04-0.85,8AL58 / 20-XXX, 8AL58 / 27-2.8AL58R / 40-XXX, 8AL58 / 61-18,8AL58 / 61-15, 8A1 / 69-XXX, 8AL58 / 79-5K, 8AL58 / 79-10K, 8AL58 / MIX1,45,8AL58 / MIX2,2
OGG0007
Data sheet
- Warranty
- 3¨
- Application / usage
- ATEX zone
Dust / AD gas detectors
- IP65
- Based on microprocessor
- Exit 4-20 mA
- Three outputs of relay contacts without tension
- RS-485 Series Interface Modbus RTU or protocol for remote control and maintenance operations
- LCD display of 8x2 characters
- Calibration procedure "A person" non-intrusive
- Fully programmable
- Small size
- Reduced power consumption
- Based on microprocessor
- Exit 4-20 mA
- Three outputs of relay contacts without tension
- RS-485 Series Interface Modbus RTU or protocol for remote control and maintenance operations
- LCD display of 8x2 characters
- Calibration procedure "A person" non-intrusive
- Fully programmable
- Small size
- Reduced power consumption
Certified ATEX gas detector II 3G EX Na II T6 (ATEX ZONE 2), aluminum or stainless steel alloy case, IP65 protection index. Available outputs: 4-20mA or relay, RS485.
References Manufacturer: Dust / AD / 1XX / AAS, Dust / AD / 1XX / CCS, Dust / AD / 1XX / AAS-ID, Dust / AD / 1XX / CCS-ID, Dust / AD / 1XXS / AAS, Dust / AD / 1XXS / CCS, Dust / AD / 1XXS / AAS-ID, Dust / AD / 1XXS / CCS-ID, Dust / AD / 141S / AAS, Dust / AD / 141S-1 / AAS, Dust / AD / 141S / AAS-ID, Dust / AD / 141S-1 / AAS-ID, Dust / AD / 141S / CCS, Dust / AD / 141S-1 / CCS, Dust / AD / 141S / CCS-ID, Dust / AD / 141S-1 / CCS-ID, Dust / AD / 2XX / AAS, Dust / AD / 2XX / AAS-ID, Dust / AD / 2XX / CCS, Dust / AD / 2XX / CCS-ID, Dust / AD / 2XXD ,,, / AAS, Dust / AD / 2XXD ,,, / AAS-ID, Dust / AD / 2XXD ,,, / CCS, Dust / AD / 2XXD ,,, / CCS-ID, Dust / AD / 279 / AAS, Dust / AD / 279 / AAS-ID, Dust / AD / 279-2 / AAS, Dust / AD / 279-2 / AAS-ID, Dust / AD / 279 / CCS, Dust / AD / 279 / CCS-ID, Dust / AD / 279-2 / CCS, Dust / AD / 279-2 / CCS-ID, Dust / AD / 279D ,,, / AAS, Dust / AD / 279D ,,, / AAS-ID, Dust / AD / 279D ,,, / CCS, Dust / AD / 279D ,,, / CCS-ID, Dust / AD / 361 / AAS, Dust / AD / 361 / AAS-ID, Dust / AD / 361 / CCS, Dust / AD / 361 / CCS-ID, Dust / AD / 361 + / CCS, Dust / AD / 361 + / CCS-ID, Dust / AD / 320 / AAS, Dust / AD / 320 / AAS-ID, Dust / AD / 320-1 / AAS, Dust / AD / 320-1 / AAS-ID, Dust / AD / 320-2 / AAS, Dust / AD / 320-2 / AAS-ID, Dust / AD / 369 / AAS, Dust / AD / 369 / AAS-ID, Dust / AD / 369-1 / AAS, Dust / AD / 369-1 / AAS-ID, Dust / AD / 369-2 / AAS, Dust / AD / 369-2 / AAS-ID, Dust / AD / 369-3 / AAS, Dust / AD / 369-3 / AAS-ID, Dust / AD / 340 / AAS, Dust / AD / 340 / AAS-ID, Dust / AD / 340-1 / AAS, Dust / AD / 340-1 / AAS-ID, Dust / AD / 340-2 / AAS, Dust / AD / 340-2 / AAS-ID, Dust / AD / 340-3 / AAS, Dust / AD / 340-3 / AAS-ID, Dust / AD / 340-4 / AAS, Dust / AD / 340-4 / AAS-ID, Dust / AD / 327 / AAS, Dust / AD / 327 / AAS-ID, Dust / AD / 327-1 / AAS, Dust / AD / 327-1 / AAS-ID, Dust / AD / 370 / AAS, Dust / AD / 370 / AAS-ID, Dust / AD / 370-1 / AAS, Dust / AD / 370-1 / AAS-ID, Dust / AD / 363 / AAS, Dust / AD / 363 / AAS-ID, Dust / AD / 364 / AAS, Dust / AD / 364 / AAS-ID, Dust / AD / 365 / AAS-ID, Dust / AD / 366 / AAS, Dust / AD / 366 / AAS-ID, Dust / AD / 339 / AAS, Dust / AD / 339 / AAS-ID, Dust / AD / 39Y / AAS, Dust / AD / 39Y / AAS-ID, Dust / AD / 382 / AAS, Dust / AD / 382 / AAS-ID, Dust / AD / 383 / AAS, Dust / AD / 383 / AAS-ID, Dust / AD / 384 / AAS, Dust / AD / 384 / AAS-ID, Dust / AD / 320 / CCS, Dust / AD / 320 / CCS-ID, Dust / AD / 320-1 / CCS, Dust / AD / 320-1 / CCS-ID, Dust / AD / 320-2 / CCS, Dust / AD / 320-2 / CCS-ID, Dust / AD / 369 / ccs, dust / ad / 369 / ccs-id, dust / ad / 369-1 / ccs, dust / ad / 369-1 / ccs-id, dust / ad / 369-2 / ccs, dust / ad / 369-2 / CCS-ID, Dust / AD / 369-3 / CCS, Dust / AD / 369-3 / CCS-ID, Dust / AD / 340 / CCS, Dust / AD / 340 / CCS-ID, Dust / AD / 340-1 / CCS, Dust / AD / 340-1 / CCS-ID, Dust / AD / 340-2 / CCS, Dust / AD / 340-2 / CCS-ID, Dust / AD / 340-3 / CCS, Dust / AD / 340-3 / CCS-ID, Dust / AD / 340-4 / CCS, Dust / AD / 340-4 / CCS-ID, Dust / AD / 327 / CCS, Dust / AD / 327 / CCS-ID, Dust / AD / 327-1 / CCS, Dust / AD / 327-1 / CCS-ID, Dust / AD / 370 / CCS, Dust / AD / 370 / CCS-ID, Dust / AD / 370-1 / CCS, Dust / AD / 370-1 / CCS-ID, Dust / AD / 363 / CCS, Dust / AD / 363 / CCS-ID, Dust / AD / 364 / CCS, Dust / AD / 364 / CCS-ID, Dust / AD / 365 / CCS, Dust / AD / 365 / CCS-ID, Dust / AD / 366 / CCS, Dust / AD / 366 / CCS-ID, Dust / AD / 339 / CCS, Dust / AD / 339 / CCS-ID, Dust / AD / 39Y / CCS, Dust / AD / 39Y / CCS-ID, Dust / AD / 382 / CCS, Dust / AD / 382 / CCS-ID, Dust / AD / 383 / CCS, Dust / AD / 383 / CCS-ID, Dust / AD / 384 / CCS, Dust / AD / 384 / CCS-ID, Dust / AD / 571 / AAS, Dust / AD / 571 / AAS-ID, Dust / AD / 571-1 / AAS, Dust / AD / 571-1 / AAS-ID, Dust / AD / 571-2 / AAS, Dust / AD / 571-2 / AAS-ID, Dust / AD / 571 / CCS, Dust / AD / 571 / CCS-ID, Dust / AD / 571-1 / CCS, Dust / AD / 571-1 / CCS-ID, Dust / AD / 571-2 / CCS, Dust / AD / 571-2 / CCS-ID
OGG0003
Data sheet
- Ambiant temperature
- -40 ° C to + 85 ° C
- Temperature class
- T6
- Warranty
- 3¨
- Waterproofing protection (IP)
- Ip65
- Application / usage
- ATEX zone
- Certificates
- Atex.iecex
Power supply for CM-10T5
Central unit of gas detectors. An analog input 4-20 mA, n. Output 3 Relay (warning, alarm, fault) to activate the alarm devices. Possibility to set the alarm thresholds. 24 VDC power supply. Din rail mounting.
References Manufacturer: ML70.100
OGG0024
Data sheet
- Warranty
- 3¨
- Application / usage
- Industry
CM-80T4N-B single card gas detection system
References Manufacturer: CM-80T4N-B, CM-80T4N-E-B
OGG0018
Data sheet
- Warranty
- 3¨
- Application / usage
- Industry
Dust / DY gas detectors
- IP65
- Based on a microprocessor
- exit from 4 to 20 mA
- Three outputs of relay contacts without tension
- RS-485 Series Interface Modbus RTU or protocol for remote control and maintenance operations.
- 8x2 characters LCD screen
- Calibration procedure 'a person' non-intrusive
- Fully programmable
- Reduced size
- Low energy consumption
- Based on a microprocessor
- exit from 4 to 20 mA
- Three outputs of relay contacts without tension
- RS-485 Series Interface Modbus RTU or protocol for remote control and maintenance operations.
- 8x2 characters LCD screen
- Calibration procedure 'a person' non-intrusive
- Fully programmable
- Reduced size
- Low energy consumption
Certified ATEX gas detector II 3G EX Na II T6 (ATEX ZONE 2), aluminum or stainless steel alloy case, IP65 protection index. With display. Available outputs: 4-20mA or relay, RS485.
References Manufacturer: DUST / DY / 1XX / AAS, DUST / DY / 1XX / CAS, DUST / DY / 1XXS / AAS, DUST / DY / 1XXS / CAS, DUST / DY / 2XX / AAS, DUST / DY / 2XX / CAS, DUST / DY / 2XXD ,,, / AAS, DUST / DY / 2XXD ,,, / CAS, DUST / DY / 279 / AAS, DUST / DY / 279-2 / AAS, Dust / DY / 279 / Case, Dust / DY / 279-2 / Case, Dust / DY / 279D ,,, / AAS, DUST / DY / 279D ,,, / CAS, DUST / DY / 361 / AAS, Dust / DY / 361 / CAS, DUST / DY / 361 + / CAS, DUST / DY / 320 / AAS, DUST / DY / 320-1 / AAS, DUST / DY / 320-2 / AAS, DUST / DY / 369 / AAS, Dust / DY / 369-1 / AAS, Dust / DY / 369-2 / AAS, Dust / DY / 369-3 / AAS, Dust / DY / 340 / AAS, DUST / DY / 340-1 / AAS, DUST / DY / 340-2 / AAS, DUST / DY / 340-3 / AAS, DUST / DY / 340-4 / AAS, DUST / DY / 327-1 / AAS, DUST / DY / 370 / AAS, DUST / DY / 370-1 / AAS, DUST / DY / 364 / AAS, DUST / DY / 366 / AAS, DUST / DY / DY / 339 / AAS, DUST / DY / 39Y / AAS, DUST / DY / 382 / AAS, DUST / DY / 384 / AAS, DUST / DY / 320 / CAS, Dust / DY / 320-1 / Case, Dust / DY / 320-2 / Case, Dust / DY / 369 / Case, Dust / DY / 369-1 / Case, Dust / DY / 369-2 / Case, Dust / DY / 369-3 / Case, Dust / DY / 340 / Case, Dust / DY / 340-1 / Case, Dust / DY / 340-2 / Case, Dust / DY / 340-3 / Case, Dust / DY / 340-4 / Case, Dust / DY / 327 / case, dust / dy / 327-1 / case, dust / dy / 370 / case, dust / dy / 370-1 / case, dust / dy / 363 / case, dust / dy / 364 / case, dust / dy / 365 / case, Dust / DY / 366 / Case, Dust / DY / 339 / Case, Dust / DY / 39Y / Case, Dust / DY / 382 / Case, Dust / DY / 383 / Case, Dust / DY / 384 / Case, Dust / DY / 571 / AAS, Dust / DY / 571-1 / AAS, Dust / DY / 571-2 / AAS, Dust / DY / 571 / Case, Dust / DY / 571-1 / Case, Dust / DY / 571-2 / Case, RAS-DY-EX2AL-101
OGG0004
Data sheet
- Ambiant temperature
- -40 ° C to + 85 ° C
- Temperature class
- T6
- Warranty
- 3¨
- Waterproofing protection (IP)
- Ip65
- Application / usage
- ATEX zone
- Certificates
- Atex.iecex
ML70 power supply with rack facade
DIN bar mounting power supply, 115/220 VAC output 21-28 VDC 3A output
References Manufacturer: PSU-70
OGG0027
Data sheet
- Warranty
- 3¨
- Application / usage
- Industry
CM-80T4N Programmable Detection Center in Rack format 19 "
References Manufacturer: CM-80T4N-R, CM-80T4N-E-R
OGG0020
Data sheet
- Warranty
- 3¨
- Application / usage
- Industry
GDA flow regulator
- Automatic operation
- Compatibility with non-rechargeable gas cartridges
- pressure indicator
- Appliances with integrated electrical sampling pump
- automatic bump test and calibration stations
- Compatibility with non-rechargeable gas cartridges
- pressure indicator
- Appliances with integrated electrical sampling pump
- automatic bump test and calibration stations
Constant Flow Flow Flow Flow Controllers (GDA / S-REGC) or automatic flow controllers (COD.GDA / REG-DF-1) for non-rechargeable gas cylinder, with pressure indicator. Automatic valves, adapting their flow rate to the suction force, are ideal for use with built-in electrical sampling pump devices or with automatic bump test and calibration stations.
References Manufacturer: GDA / S-REG, GDA / S-REGSS-1, GDA / MULET, GDA / REG-DF-1, GDA-TC
OGG0008
Data sheet
- Warranty
- 3¨
- Application / usage
- ATEX zone
- Certificates
- THIS
- Material
- Stainless steel body AISI 316L
Park Gas Detector with Technology Enose
- IP65
- Base Temperature -40 to 85 ° C
- Base Temperature -40 to 85 ° C
Park4 Series Gas Detector in an IP65 Aluminum Alloy Case. Available Outings: RS485 Modbus Protocol RTU Series line or 4-20 mA. Sensors: Catalytic for flammable gases - electrochemical cell for CO or NO-NOX
References Manufacturer: PK4 / 320 / S
OGG0037
Data sheet
- Ambiant temperature
- -40 ° C to + 85 ° C
- Warranty
- 2¨
- Waterproofing protection (IP)
- Ip65
Rack 19 "
References Manufacturer: Rack 19 "
OGG0028
Data sheet
- Warranty
- 3¨
- Application / usage
- Industry
CM-80T4N Programmable Detection Center
References Manufacturer: CM-80T4N-M-B
OGG0021
Data sheet
- Warranty
- 3¨
- Application / usage
- Industry
CM-80T4 detection center
References Manufacturer: CM-80T4, CM-80T4-B
OGG0040
Data sheet
- Warranty
- 3¨
- Application / usage
- Industry
Rem-485-T0 output relay
Output Extension Module for Power Power Supplies and CM-80T4-ID N ° 12 Relay SPST Maximum switching current 3A to 30VDC Connecting to the connecting control unit Series with Modbus RTU 24V DC power protocol. Open frame version for din rail mounting
References Manufacturer: REM-485-T0
OGG0029
Data sheet
- Warranty
- 3¨
- Application / usage
- Industry
REM-485-T2 4-20 MA entries
- Eight analog inputs (4-20 mA) protected by automatic thermal fuses.
- Remote reset function for locking alarm sensors.
- Configurable series line.
- RS485 Series Communication available with Modbus RTU or CAN Bus * protocols *.
- Separate and protected power supply for each sensor channel.
- Remote reset function for locking alarm sensors.
- Configurable series line.
- RS485 Series Communication available with Modbus RTU or CAN Bus * protocols *.
- Separate and protected power supply for each sensor channel.
4-20 mA analog input extension module. N. 8 Overload-protected entries with remote reset function for manual reset sensors. Seria Bus with connection to the Modbus RTU protocol to the 24VDC power supply unit. Open frame version for din rail mounting.
References Manufacturer: REM-485-T2
OGG0032
Data sheet
- Ambiant temperature
- -40 ° C to + 85 ° C
- Warranty
- 3¨
- Feed
- 24V DC
- Application / usage
- Industry
GDA-JB-485 / GDA-JB-485-R junction box
- IP66 & 67
- Temperature base -30 ° C - 100 ° C
- Temperature base -30 ° C - 100 ° C
The GDA-JB-485 junction boxes are suitable for indoor and outdoor applications and are useful for creating a dorsal line for serial loop signals and power supply capable of ensuring the continuity of the connection between different devices. They are suitable for each type of device connected to the addressable systems with the ability to disconnect any device without the risk of interrupting the main back line. Small and simple to install with their IP66 / 67 wall mounting box. High stability fat resistance, mineral oils, diesel, low acids, alkalis strong and alcohol. For extreme impacts resistant to shock, unbreakable, weather resistant and UV, flame retardant and halogen. Mounting clips or internal openings outside the sealing area.
References Manufacturer: GDA-JB-485
OGG0036
Data sheet
- Waterproofing protection (IP)
- Ip66.ip67
ATEX Series 210 Fixed Flame Detector
- IP65
- Robust sensors make flame detectors virtually suitable for any type of fire.
- Sophisticated software improves the reliability and efficiency of the detector.
- The design of the housing and mounting bracket prevents grounding errors.
- The automatic sensor test (Built-in Self-Test) improves the reliability and efficiency of the flame detector.
- A pressure compensation device prevents unplanned maintenance costs due to moisture accumulation inside the housing and extends its service life.
- Anti-spark design improves reliability and efficiency at a reasonable cost.
- Warranty: 24 months from installation or 30 months from the supply.
- Robust sensors make flame detectors virtually suitable for any type of fire.
- Sophisticated software improves the reliability and efficiency of the detector.
- The design of the housing and mounting bracket prevents grounding errors.
- The automatic sensor test (Built-in Self-Test) improves the reliability and efficiency of the flame detector.
- A pressure compensation device prevents unplanned maintenance costs due to moisture accumulation inside the housing and extends its service life.
- Anti-spark design improves reliability and efficiency at a reasonable cost.
- Warranty: 24 months from installation or 30 months from the supply.
UV Technology Flame Detector, Fiberglass Case, Suitable for Atex Area Zone 2/22, Certified EN54-10, FM3260 and FM3611
References Manufacturer: UV-185 / 5CZ, UV / IR-210 / 1CZ, IR3-109 / 1CZ
OGG0010
Data sheet
- Ambiant temperature
- -40 ° to + 70 °
- Temperature class
- T4
- Warranty
- 2¨
- Feed
- 12V AC / DC
- Waterproofing protection (IP)
- Ip65
- Application / usage
- En-54
- ATEX zone
- Zone 2/22
- Gas class
- IIC
- Certificates
- Atex.fm
- Material
- Reinforced polyester (GRP)
- Body colors
- Red
- LED indicator
- 1¨
- Cable entry (s)
- 1xm20
- Type of detection
- Ir3