FLASH Xenon X500 Series Fire

Industrial Xenon Industrial Flashing Fire The X501-500 series are suitable for industrial signaling applications requiring a very powerful signal. Xenon tags (sometimes called stroboscopes) are controlled by a printed circuit and emit a very bright white light flash, and very bright in ionizing and then discharging an important current through the xenon gas. The design allows a termination inside the housing. This range of tags integrates an internal Fresnel lens designed to maximize the light intensity and has a double flash option (activated by a jumper on the printed circuit) which extends the duration of the signal, making it more noticeable to the Human eye. The DC unit is set at the factory on 24 V, but a rider on the printed circuit board makes it possible to operate in 12 V. The DC version is also supplied with a bilateral current limiter that should be used on all installations to protect the circuit board. Printed circuit board. Damage caused by the call current. Due to the nominal power of the tag, it is not recommended to use more than 12 hours per 24-hour period.