Previous
Next
Manual Trigger ATEX CP135 in GRP
- ATEX and IECEX Certified ATEX: II 2G EXD IB + H2 T4 - T6 (incorporating IIA) Zones 1, 2, 21 & 22
- Compliant with (IEC) 60079-0 EN (IEC) 60079-1 and EN54
- Dust and weatherproof waterproof
- Available in SIL2 version
- Compliant with (IEC) 60079-0 EN (IEC) 60079-1 and EN54
- Dust and weatherproof waterproof
- Available in SIL2 version
Garanties sécurité
(à modifier dans le module "Réassurance")
Politique retours
(à modifier dans le module "Réassurance")
Politique de livraison
(à modifier dans le module "Réassurance")
The anti-explosion CP135 manual trigger range has been approved for use in potentially explosive atmospheres and difficult environmental conditions. Among the current applications include oil and gas, on-shore and off-shore facilities, chemistry, petrochemicals, refineries and maritime sites, etc. The CP135 is compatible with PLC, DCS and ESD systems via 4-20mA output. It is ideally suited for use in fire alarm systems and an addressable option with diode is available. The range also offers an additional LED visual indication option; Red, green (or both) can be mounted. When the fault or alarm state occurs, the green LED is replaced by the red LED. The design allows the termination inside the unit.
References Manufacturer: CP135, CP135-SIL2
| Ambiant temperature | -40°C to +55°C |
|---|---|
| Temperature class | T6 |
| Warranty | 3¨ |
| Feed | max. 500 V AC. 250V DC |
| Waterproofing protection (IP) | Ip66.ip67 |
| Application / usage | ATEX zone |
| ATEX zone | Zone 1/2 |
| Gas class | IIC |
| ATEX protection mode | Ex d (explosion) |
| Certificates | Atex.iecex |
| Frequency (Hz) | 50 / 60hz |
| Material | Reinforced polyester (GRP) |
| Certificat_atex-en_us | NEMKO 13ATEX1568X |
| Certificat_iecex-en_us | IECEX NEM 13.0038X |
| Body colors | Red (RAL3001) |
| Light source | LED |
| LED indicator | 1¨ |
Products in the same category
Previous
Next